Tank95-Analog DIY+ Do It Yourself 2 Inch Drone Kit from CycloneFPV

Tank95-Analog DIY+ Do It Yourself 2 Inch Drone Kit from CycloneFPV

The new DIY+ Tank95-Analog Do It Yourself 2 Inch Drone Kit from CycloneFPV is designed to provide drone hobbyists and professionals with a step by step building and configuration video series.

If you find yourself stuck on a particular step, please click here to access our troubleshooting page.

Tank95-Analog DIY+ 2 Inch Drone Kit Part 1 - Frame Assembly:

 

Tank95-Analog DIY+ 2 Inch Drone Kit Part 2 - FC Installation:

Tank95-Analog DIY+ 2 Inch Drone Kit Part 3 - Motor Installation:

Tank95-Analog DIY+ 2 Inch Drone Kit Part 4 - VTX Installation:

Tank95-Analog DIY+ 2 Inch Drone Kit Part 5 - Camera Installation:

 

Tank95-Analog DIY+ 2 Inch Drone Kit Part 6 - FrSky M+ Installation:

Tank95-Analog DIY+ 2 Inch Drone Kit Part 7 - Antenna Installation: 

Tank95-Analog DIY+ 2 Inch Drone Kit Part 8 - Prop Guard Installation: 

Tank95-Analog DIY+ 2 Inch Drone Kit Part 9 - BetaFlight Firmware Updates:

Tank95-Analog DIY+ 2 Inch Drone Kit Part 10 - VTX Table Setup: 

Tank95-Analog DIY+ 2 Inch Drone Kit Part 11 - BLHeli Firmware and Setup:

Tank95-Analog DIY+ 2 Inch Drone Kit Part 12 - FrSky X9Lite and M+ Bind and Configure:

Tank95-Analog DIY+ 2 Inch Drone Kit Part 13 - Indoor LOS Maidens and Crashes: 

You have completed the configuration of your drone. You must now complete the configuration of your Transmitter and Receiver. Please click one of the two links below to transfer to your Radio and Receiver Page.

Share this post...

Previous post Next post