Plug'nPilot™ Troubleshooting Guide from FPVProfessor™

Plug'nPilot™ Troubleshooting Guide from FPVProfessor™

Flight Controller FAQ's

  • My flight controller does not go into DFU mode when I try to flash the firmware.

MAC FAQ's

  • When I try to connect to BLHeli from my MAC I get the following error "I get error esc#1 boot loader d #100 seems not valid for bheli32".
    • This is because you are attempting to run the 32 bit version and connect to a 16 bit ESC. You need to run the BLHeli_S from Chrome. You can follow the instructions shown in this video here. 

Share this post...

Previous post Next post